Choose the media you would like to view from the menu on your device and play as you normally would.Some devices may not have this ability, but they can still be used with the projector to project videos, photo slide shows, and some app content (this functionality is app dependent). NOTE: After syncing with the projector you may see your device’s screen being mirrored by the projector. Allow the projector 15 to 20 seconds to fully start up and sync with your device.Power on the projector by flipping the power switch to the on position.If no external speaker is connected, the projector’s internal speaker will be used for audio. If desired, connect a speaker to the 3.5mm audio out jack.NOTE: Some devices may require an adapter to connect to your device. Connect the included HDMI cable to the HDMI port on the projector and the other end to your device.To power the projector with the built-in battery, simply turn the projector on.Once connected, the power indicator light will illuminate red on the projector to show it is connected to power. To power the projector with the Micro USB to USB cable, connect the Micro USB to the projector’s and plug the other end into a USB port.The projector can be powered using the included Micro USB to USB cable or the built-in battery.IMPORTANT: Fully charge the battery before the first use (approximately 3-4 hours). The blue system indicator light will come on if the battery power is getting low. To learn more about these settings and using multiple displays with your Mac, check out Apple's Support article Use multiple displays with your Mac.The built-in battery is charged using the included Micro USB to USB cable. You can also setup the projected image to mirror what is on your laptop. For example, you can extend your display to use the projected image as an extension of your main laptop screen. Your MacBook offers a variety of display options which will control how the projected image as used. The USB-C cable that comes with the projector will support video and charging and is labeled on one end with USB-C Video Cable. IMPORTANT: Not all USB-C Cables will support video. To connect your MacBook with USB-C to a Miroir M220 projector, you will need a USB-C Video Cable (included in the box). Connect Your MacBook Pro and MacBook using USB-C The battery is fully charged when all the lights. If you are still unable to get an image, there may be a problem with the HDMI cable, or the adapter itself. Location of Parts and Controls Battery Indicator Lights - Lights flash in turn as the device charges. Additionally, try connecting your iPhone or iPad to another HDMI display with the same cable and adapter to see if you get the same results. Third party adapters may not function reliably or properly. Having trouble connecting your iPhone or iPad?īe sure to double check that you are using an authentic Apple Digital AV adapter to connect. To connect your Apple device to your Miroir M220 projector, you will need an Apple Digital AV Adapter (sold separately) and an HDMI cable (included in the box). Cooling Vent - IMPORTANT: Do not cover or block airflow to the vent.Ĭonnecting Your Device to the Projector Connect Using HDMI.Tripod Mount - Will fit a standard sized tripod screw.Rubber Foot Pads - Provides stability and proper airflow to cooling vents.Battery life will be displayed by the number of lit battery indicator lights.

Briefly press to check battery life on the projector. Power Button - Press and hold for 3 seconds to power the projector on or off.Reset Button - Press to reset projector.Auto Focus Sensor - IMPORTANT: Do not block sensor.Fully charge battery before the first use (approx. USB-C Charge Input - Connect the supplied USB-C charging cable and power adapter.USB Power Output - Connect a USB power cable to provide power to a HDMI streaming stick.HDMI Video Input - Connect an HDMI cable to a device that supports HDMI video output.USB-C Video Input - Connect the supplied USB-C video cable to a device that supports USB-C video output.Audio Out (3.5mm) - (Optional) Connect an external speaker or headphones.Press and hold to turn ECO brightness mode on or off. Mode Control - Press for auto focus and auto keystone adjustments.Volume Controls - Increase/decrease the volume output of the projector.The battery is fully charged when all the lights illuminate and no longer flash. Power Switch Connect the supplied Micro USB to USB charging cable to a USB wall outlet or USB port on a computer to charge the projector’s internal battery. Battery Indicator Lights - Lights flash in turn as the device charges.

Miroir micro projector m20 user manual